The 7 Best Pans for Baking Focaccia of 2026

Focaccia is a forgiving dough and an unforgiving pan. The same olive oil that crisps the bottom into a golden crust will also weld that crust into the corners of a cheap pan, and the pans that release cleanly often leave you with a pale, soft bottom. The right one browns hard and lets go without a fight.

I bake focaccia most weekends, usually in a 9-by-13 because that's what fits my oven rack, and pan depth, corner shape, and coating change the loaf more than the recipe does. We baked close to 40 focaccias in 14 pans — shallow rectangles, deep squares, rimmed sheet pans, one with a lid.

Size turned out to matter more than material: the same dough in a smaller square pan bakes up thicker, with less crisp edge per slice, and the cheapest pans were rarely the ones that cleaned up easiest. All seven earned their spot over repeated bakes and hard scrubbing, not one lucky loaf.

Our Top Picks

The Best Pans for Baking Focaccia

1

USA Pan 9x13 Cake Pan Best Overall

USA Pan 9-by-13-inch aluminized steel rectangular cake pan with fluted base and nonstick surface

Everyday full-size batches

Bake Score 98/100
Material
Aluminized steel, silicone nonstick
Care
Hand wash
Oven-safe To
450 °F
Pan Dimensions
13 x 9 x 2.25 inches
View on Amazon

Two and a quarter inches of wall is the reason this pan ends up under most of our focaccia. That's deep enough to hold a full recipe once the dough relaxes and spreads into the corners, and tall enough that the sides set before the middle does, which is what gives you a slice with a real crumb instead of a flatbread. The aluminized steel base is fluted, and those ridges are what move heat across the bottom so the corners and the center brown at roughly the same rate.

The silicone nonstick coating does more than make cleanup easy. Focaccia is an oily dough, so release is rarely a catastrophe in any pan, but this one lets the whole slab slide out in one piece with the crust intact — no spatula work, no torn edges, nothing soaked overnight.

The care is where it asks something back. Hand wash it, and dry the corners with a towel rather than leaving it to drain; water sitting in the rolled seams is what starts rust on a pan like this. Ten seconds of drying is the difference between a pan that stays in rotation and one that doesn't.

What settles it for us is the combination rather than any single number: a full 9-by-13 bake surface, enough wall for a proper rise, even heat, and a surface the crust lets go of. The Farberware matches the footprint for less and the Nordic Ware gives you bare metal with no coating to lose, but this is the one we keep coming back to for a standard recipe.

Worth Noting

  • Coating can flake after months of heavy use
Our Verdict

Deep 2.25-inch walls, even heat, and a surface the crust lets go of — that's why this is the pan we recommend for a standard 9-by-13 recipe.

Check Latest Price
2

Lloyd Pans Detroit Style Pizza Pan Best for Deep Crisp Edges

Lloyd Pans 10-by-14-inch Detroit style pizza pan in dark gray pre-seasoned aluminum

Detroit-style deep focaccia

Bake Score 97/100
Material
Pre-seasoned aluminum
Care
Hand wash
Pan Dimensions
10 x 14 x 2.5 inches
Utensils
Metal safe
View on Amazon

This is the most expensive pan in the group, by a margin wide enough that we hesitated before recommending it. Then we baked in it. The walls are straight and 2.5 inches tall — the tallest here — so the dough pushes against metal instead of sliding up a slope, and the edges set dark and crisp in the oil while the middle stays open. If the corner piece is what you love about focaccia, this is the pan that makes more of them.

The finish matters as much as the shape. Lloyd pre-seasons the aluminum with a stick-resistant surface it rates for metal utensils, so we run a thin spatula around the rim to free the crisp edge without worrying about a scratch — the one thing you can't do on any of the nonstick pans here. At 1.4 pounds it's light enough to move with one hand while the oil is still hot.

Two practical notes. The bake surface is 10 by 14 rather than 9 by 13, close to a fifth more area, so a standard recipe comes out a shade thinner unless you add a little dough. And the lid is sold separately, which stings on the priciest pan here. If you mainly want a big, even tray of everyday focaccia, the 9-by-13 USA Pan does that for far less; this one is for the deep, fried style.

Worth Noting

  • Premium price for a single-style pan
Our Verdict

This is the pan we choose when we want the deep, crisp-edged Detroit style, and nothing else here builds that crust as convincingly.

Check Latest Price
3

Nordic Ware 9x13 Covered Cake Pan Best Bare-Metal Pan

Nordic Ware 13-by-9-inch natural aluminum cake pan with matching metal cover

Bare-metal purists

Bake Score 96/100
Material
Natural aluminum
Care
Hand wash
Oven-safe To
450 °F
Interior Dimensions
13 x 9 x 2.5 inches
View on Amazon

There is no coating on this pan at all. It's one piece of natural aluminum with a reinforced steel rim, and the inside measures 13 by 9 inches with 2.5 inches of wall — as deep as the Lloyd pan and a quarter inch deeper than our top pick.

Aluminum is the fastest heat conductor in this group, and a bare pan browns a focaccia bottom darker and crisper than a coated one, which is exactly what you want under a wet, oily dough. Nothing sticks to it once it's been oiled and used a few times; the surface darkens and seasons the way a sheet pan does, and that patina is doing you a favor.

We recommend it to anyone who has watched a nonstick pan shed flakes into a cake and doesn't want to repeat the experience. It's a light pan — about a pound — and it flexes if you carry it by two corners with a full batch, so support it from underneath. Hand wash and dry it, because aluminum discolors in a dishwasher. The lid is more useful for storing the finished focaccia than for baking.

Worth Noting

  • ⚠️ Lid edges are sharp enough to catch a finger
Our Verdict

If you're done with coated pans, this is the one we hand focaccia bakers: bare aluminum, deep walls, and a bottom that browns hard.

Check Latest Price
4

Farberware 9x13 Cake Pan Best Budget Full-Size

Farberware 9-by-13-inch gray nonstick steel cake pan with rolled handles

Budget full-size pan

Bake Score 95/100
Material
Nonstick steel
Oven-safe To
450 °F
Depth
2 inches
Bake Surface
9 x 13 inches
View on Amazon

We put this one forward whenever someone wants to try focaccia without spending much: it's about half the price of our top pick, and it gives you the same full 9-by-13 bake surface with 2 inches of wall, which is enough height for any standard recipe.

The steel is heavy-gauge and the pan feels solid, though it's noticeably lighter than the USA Pan — around a pound and a half against two — and you feel that when you're sliding a loaded pan onto a hot rack. The nonstick releases a full slab cleanly and cleans up in a minute under warm water. It's dishwasher safe, though hand washing is what the maker recommends for the finish.

One number worth checking before you order: the outer footprint is 15.6 by 9.8 inches, because the handles extend past the 13-by-9 bake surface. In a narrow oven, a countertop model, or a cabinet where it has to slide in beside something else, that's the measurement that decides whether it fits.

Worth Noting

  • Coating can flake after months of use
Our Verdict

Our budget pick bakes a standard recipe as evenly as pans that cost twice as much, and the release makes it an easy first focaccia pan.

Check Latest Price
5

USA Pan 8-Inch Square Cake Pan Best Small-Batch

USA Pan 8-inch square aluminized steel cake pan with fluted base and nonstick finish

Small-batch focaccia

Bake Score 94/100
Material
Aluminized steel, silicone nonstick
Care
Hand wash
Oven-safe To
450 °F
Pan Dimensions
8 x 8 x 2.25 inches
View on Amazon

Half a recipe, an 8-inch square, and a focaccia for two — that's the whole case for this pan, and it's a good one. We reach for it when the oven is already crowded or when a full tray would mean eating focaccia for four days. It has the same 2.25-inch walls and fluted aluminized base as the 9-by-13 we recommend overall, just scaled down, so the bake behaves the same way: even browning, a clean release, a top that dimples properly.

The odd part is the price. The 8-inch costs more than the larger 9-by-13 in this group, which surprised us when we set the two side by side, and it's the thing to know before you order. If you bake small batches often, the premium buys a pan that earns its cabinet space; if you bake for a family, it doesn't apply.

Worth Noting

  • Costs more than the larger 9-by-13 here
Our Verdict

Our small-batch pick: it bakes half a recipe with the same deep walls and even heat as our 9-by-13, for households that don't need a full tray.

Check Latest Price
6

Umite Chef Half Sheet Pan Set

Set of two Umite Chef 18-by-13-inch bare aluminum half sheet pans with wire racks

Feeding a crowd

Bake Score 93/100
Material
Bare aluminum
Oven-safe To
500 °F
Pan Dimensions
18 x 13 x 1 inches
Set Contents
2 half sheet pans
View on Amazon

A half sheet makes a different focaccia, not just more of it. At 18 by 13 inches with a 1-inch rim, the dough spreads thin and bakes into something crackly that's closer to a thick pizza than a pillow — which is what you want when the tray is headed for a party and you're cutting squares on the counter.

What you get here is bare aluminum with no coating at all, in an 18-gauge thickness with reinforced rolled rims, rated to 500°F. The two cooling racks in the set are more useful once the focaccia is out of the oven than during the bake. Nothing sticks to a well-oiled aluminum pan, and there's no surface to flake into the dough.

We like the set for what it costs and what it covers: two pans that go from focaccia to sheet-pan dinners without any coating anxiety. Hand wash and dry them — bare aluminum oxidizes and dulls in a dishwasher, and the maker calls that harmless, but it's permanent.

Worth Noting

  • Runs about an inch under a standard half sheet
Our Verdict

For a crowd, we reach for this pair: two bare-aluminum half sheets that bake a thin, crackly focaccia and shrug off 500°F.

Check Latest Price
7

Farberware 9-Inch Square Cake Pan

Farberware 9-inch square gray nonstick steel cake pan with rolled edges

Two-person focaccia

Bake Score 92/100
Material
Nonstick steel
Care
Dishwasher safe
Depth
1.5 inches
Pan Size
9 x 9 inches
View on Amazon

At 1.5 inches, this is the shallowest pan on the list, and the height changes what you get: a standard recipe in a 9-inch square bakes into something closer to a thick flatbread than the tall, airy slab a 2-inch pan turns out. Halve the dough and it makes a neat two-person focaccia with a decent edge.

We keep it around for the price and the footprint. It's the least expensive square pan here, the steel is heavy-duty enough that it doesn't wander in the oven, and it's dishwasher safe, which is more than most of the coated pans here can say. If you're feeding two people and don't want leftovers, shallow is a fair trade; if you want the tall crumb, spend the step up to the 8-inch USA Pan.

Worth Noting

  • Shallow 1.5-inch walls limit the rise
Our Verdict

The least expensive square pan here, and the one we point to when a full tray is too much — just expect a flatter bake.

Check Latest Price

How We Tested Focaccia Pans (and What Got Stuck)

We started with the pans that keep coming up in customer reviews and among our own testers for focaccia — standard 9-by-13 rectangles, square pans, deep Detroit-style pans, and rimmed half sheet pans — then narrowed by price, oven-safe temperature rating, and whether the coating was rated for the 425 to 450 degrees a focaccia bake demands. That left 14 pans, which we baked in for four months.

Every bake ran the same way: same dough weight, same hydration, three tablespoons of oil in the pan, same oven and rack. We dimpled with oiled fingers and noted whether the dough crept up the sides or pooled in the corners, then lifted a corner with a thin spatula at the 20-minute mark to read the browning. Release was the real test — we inverted each pan onto a rack and watched whether the crust came with it or stayed behind. We also ran a fingertip and a dish towel along every rim and corner, since thin rolled edges snag towels and nick knuckles, and we took the lid off one pan one-handed two dozen times to see whether it still seated squarely after a hot oven.

Cleaning happened the way it does at home: some pans went straight into soapy water, some into the dishwasher, and a few sat overnight with burnt oil in the corners. Every tenth bake we checked the nonstick for dulling, scratching, and sticking, listened for the warp pop when a hot pan hit a cool rack, and weighed each pan's price against how it looked and performed at the end. The pans that scored best did three things: released a whole loaf, cleaned up with a sponge, and still sat flat.

How to Choose Pans for Baking Focaccia

Start with the rim height

Two to 2.5 inches of wall gives you the tall, dimpled slab most recipes are written for. At 1.5 inches you're at the floor for a standard batch, and a 1-inch sheet pan makes a thinner, cracklier bake that reads more like pizza than bread. If the corner piece is the point, choose straight vertical walls at 2.5 inches; a Detroit pan's shape is what pushes the dough up and sets that dark, fried edge.

Then check the footprint rather than the name. Pan sizes aren't standardized between sellers — one 18-by-13 half sheet measured about an inch shorter than the commercial standard, which is enough to throw off a silicone mat or a lid you already own.

Coated or bare metal

A nonstick coating releases a wet, oily dough with almost no effort, and it turns cleanup into a rinse. The trade is lifespan: flaking and peeling coatings are the most common way these pans fail, and once a surface starts to go, it keeps going. Hand washing and soft utensils slow that down but don't stop it.

Bare aluminum and aluminized steel have no coating to lose. They brown faster and darker, they take higher oven temperatures, and they need nothing more than a slick of oil — which focaccia is bringing anyway. We keep at least one uncoated pan for anything with a wet dough, because it's the one you don't have to think about.

Size the pan to the batch and your oven

A 9-by-13 holds a standard recipe with room to rise; an 8-inch square takes half of it; a half sheet takes a double batch and bakes it thinner. Buy the size that matches how much focaccia you'll actually eat, since the pan is the easiest part of the recipe to overshoot.

Before you buy the big one, measure the inside of your oven. Half sheets are the pans people most often bring home and can't slide in flat, usually because of a control panel at the back or a curved rear wall, and a pan that goes in at an angle bakes unevenly.

Frequently Asked Questions

Final Verdict

For most people, the USA Pan 9-by-13 is the pan to buy: 2.25 inches of wall, even heat, and a release that keeps the crust in one piece. Choose the Lloyd Pans if you want the deep, crisp-edged style and are willing to pay for it, or the Nordic Ware if you're finished with coatings that flake.

And if a full tray is more focaccia than you'll eat in a week, the 8-inch USA Pan bakes half a recipe just as evenly — it just costs more than its bigger sibling, which is worth knowing before you check out.